BLS Male Swivel Elbow Tube to Pipe Brass One Touch Fittings aq69-ps 56520 3109 169pl kql 12-447 50-579 269-OFS 11695
aq69-ps 56520 3109 169pl kql 12-447 50-579 269-OFS 11695
| Mod. | A | D | C | E | F | H | M | SW | SW1 |
| BLS-M04-M5 | 4 | M5 | 14.0 | 12.5 | 9 | 4 | 17.5 | 8 | 8 |
| BLS-M04-G02 | 4 | Gl/8 | 14.0 | 14.5 | 9 | 6 | 17.5 | 8 | 12 |
| BLS-M04-G04 | 4 | Gl/4 | 14.0 | 15.5 | 9 | 7 | 17.5 | 8 | 15 |
| BLS-M05-M5 | 5 | M5 | 15.0 | 12.5 | 10 | 4 | 20.5 | 9 | 8 |
| BLS-M06-M5 | 6 | M5 | 16.0 | 15 | 12.7 | 4 | 20 | 9 | 10 |
| BLS-M06-G02 | 6 | Gl/8 | 16.0 | 15 | 12.7 | 6 | 20 | 9 | 12 |
| BLS-M06-G04 | 6 | Gl/4 | 16.0 | 16 | 12.7 | 7 | 20 | 9 | 15 |
| BLS-M08-G02 | 8 | Gl/8 | 17.5 | 16 | 14.2 | 6 | 22.5 | 11 | 12 |
| BLS-M08-G04 | 8 | Gl/4 | 17.5 | 17 | 14.2 | 7 | 22.5 | 11 | 15 |
| BLS-M08-G06 | 8 | G3/8 | 17.5 | 17 | 14.2 | 7 | 22.5 | 11 | 19 |
| BLS-M10-G04 | 10 | Gl/4 | 20.2 | 19.5 | 16.5 | 7 | 26 | 13 | 15 |
| BLS-M10-G06 | 10 | G3/8 | 20.2 | 19.5 | 16.5 | 7 | 26 | 13 | 19 |
| BLS-M10-G08 | 10 | Gl/2 | 20.2 | 20.5 | 16.5 | 8 | 26 | 13 | 22 |
| BLS-M12-G04 | 12 | Gl/4 | 19.2 | 20 | 19.5 | 7 | 26.5 | 15 | 17 |
| BLS-M12-G06 | 12 | G5/8 | 19.2 | 20.5 | 19.5 | 7 | 26.5 | 15 | 19 |
| BLS-M12-G08 | 12 | Gl/2 | 19.2 | 21.5 | 19.5 | 8 | 26.5 | 15 | 22 |
| BLS-M14-G06 | 14 | G5/8 | 20.2 | 21.5 | 21.5 | 7 | 28.5 | 17 | 19 |
| BLS-M14-G08 | 14 | Gl/2 | 20.2 | 22.5 | 21.5 | 8 | 28.5 | 17 | 22 |
Interchangeability for reference
Parker : 169PLM-4M-M5 169PLM-4M-2G 169PLM-4M-M6 169PLM-4M-4G 169PLM-4M-M8 169PLM-6M-M5 169PLM-6M-2G 169PLM-6M-M10 169PLM-6M-4G 169PLM-8M-2G 169PLM-8M-4G 169PLM-8M-6G 169PLM-10M-4G 169PLM-10M-6G 169PLM-12M-4G 169PLM-12M-6G 169PLM-12M-8G 169PLM-14M-6G 169PLM-14M-8G
Eaton/WeatherHead :1169x2S 1169x2x4S 1169×2.5S 1169x4S 1169x4x4S 1169x4x6S 1169x5S 1169x5x4S 1169x5x6S 1169x6x2S 1169x6S 1169x6x6S 1169x6x8S 1169x8x4S 1169x8S 1169x8x8S
Midland : 20-079 20-535*20-080 20-076 20-077 20-081 20-078 20-082 20-086 20-538*20-539*20-087 20-083 20-084 20-088 20-085 20-092
Camozzi : ND6522 04-32 ND6520 53-02 ND6520 53-04 ND6520 04-02 ND6520 04-04 ND6520 04-06 ND6520 04-08 ND6520 06-02 ND6520 06-04 ND6520 06-06 ND6520 06-08 ND6520 06-12*ND6520 08-04 ND6520 08-06 ND6520 08-08 ND6520 08-12 ND6520 10-06 ND6520 10-08 ND652012-06*ND6520 12-08 ND6520 12-12
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
| Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
