BOM Round Male Pipe Tube to Pipe Brass One Touch Fittings
Mod. | A | D | F | H | L | SW1 | Weight (g) |
BOM-05-M03 | 5 | M3 | 5.8 | 2.5 | 102 | 1.5 | 1 |
BOM-05-M05 | 5 | M5 | 5.8 | 5.5 | 10 | 2 | 1 |
BOM-04-M07 | 4 | M7 | 9.4 | 5 | 17.5 | 2.5 | 5 |
BOM-04-G02 | 4 | Gl/8 | 11.2 | 5 | 15 | 2.5 | 9 |
BOM-06-M07 | 6 | M7 | 10.4 | 5 | 17 | 4 | 7 |
BOM-06-G02 | 6 | Gl/8 | 11.2 | 5 | 14 | 4 | 7 |
BOM-08-G02 | 8 | Gl/8 | 12.4 | 5 | 18.5 | 5 | 10 |
BOM-10-G04 | 10 | Gl/4 | 14.8 | 6 | 21 | 7 | 16 |
Interchangeability for reference
Parker : 68PLM-4M-2R 68PLM-4M-4R 68PLM-6M-2R 68PLM-6M-4R 68PLM-8M-2R 68PLM-8M-4R 68PLM-8M-6R 68PLM-10M-4R 68PLM-10M-6R 68PLM-10M-8R 68PLM-12M-4R 68PLM-12M-6R 68PLM-12M-8R 68PLM-14M-6R 68PLM-14M-8R
Eaton/WeatherHead : 1168×2 1168x2x4 1168×2.5 1168×2.5×4 1168×4 1168x4x4 1168x4x6 1168×5 1168x5x4 1168x5x6 1168x6x2 1168×6 1168x6x6 1168x6x8 1168×8 1168x8x8
Midland : 20-047 20-045 20-048 20-023 20-049 20-050 20-046 20-051 20-052 20-053 20-039 20-054 20-055 20-056 20-530 20-531 20-532 20-057 20-058 20-059 20-062 20-060 20-061 20-063
Camozzi :ND651204-32 ND65125332 ND651053-02 ND6510 53-04 ND651004-02 ND65100404 ND65100406 ND651004-08*ND651006-02 ND65100604 ND651006-06 ND651006-08 ND6510 08-04 ND6510 08-06 ND651008-08 ND65100812 ND65101006 |ND651010-08 ND651012-06*ND651012-08 ND651012-12
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
O-Ring Seal | NBR (other materials are available upon request) |
Gripping Mechanism | Stainless Steel |
Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
Vacuum Duty | 29.5 Inch Hg |
Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.