BL Male Elbow Tube to Pipe Brass One Touch Fittings 269PP AQ69-P 6500 169PLNS 12-445 1169
269PP AQ69-P 6500 169PLNS 12-445 1169
M0od. | A | D | C | E | F | H | M | SW |
BL-M04-R02 | 4 | Rl/8 | 5.5 | 8.5 | 9 | 7.5 | 17.5 | 8 |
BL-M04-R04 | 4 | Rl/4 | 5 | 11.5 | 9 | 12 | 19 | 9 |
BL-M05-R02 | 5 | Rl/8 | 5.5 | 8.5 | 10 | 7.5 | 20.5 | 9 |
BL-M05-R04 | 5 | Rl/4 | 5.5 | 11.5 | 10 | 12 | 20.5 | 9 |
BL-M06-R02 | 6 | Rl/8 | 4 | 9 | 12.7 | 7.5 | 20 | 9 |
BL-M06-R04 | 6 | Rl/4 | 4 | 11.5 | 12.7 | 12 | 20 | 9 |
BL-M08-R02 | 8 | Rl/8 | 5 | 10.5 | 14.2 | 6.5 | 22.5 | 11 |
BL-M08-R04 | 8 | Rl/4 | 5 | 11.5 | 14.2 | 12.5 | 22.5 | 11 |
BL-M08-R06 | 8 | R3/8 | 7 | 13 | 14.2 | 11.5 | 24.5 | 12 |
BL-M10-R04 | 10 | Rl/4 | 5.8 | 13 | 16.5 | 11.5 | 26 | 13 |
BL-M10-R06 | 10 | R3/8 | 5.8 | 13 | 16.5 | 12 | 26 | 15 |
BL-M12-R04 | 12 | Rl/4 | 7.3 | 14.5 | 19.5 | 11 | 26.5 | 15 |
BL-M12-R06 | 12 | R3/8 | 7.5 | 15.5 | 19.5 | 11.5 | 26.5 | 15 |
Interchangeability for reference
Parker :169PLM-4M-2R 169PLM-4M-4R 169PLM-6M-2R 169PLM-6M-4R 169PLM-8M-2R 169PLM-8M-4R 169PLM-8M-6R 169PLM-10M-4R 169PLM-10M-6R 169PLM-12M-4R 169PLM-12M-6R 169PLM-12M-8R 169PLM-14M-6R 169PLM-14M-8R
Eaton/WeatherHead :1169×4 1169x4x4 1169×6 1169x6x6
Midland : 20-065 20-066 20-067 20-068 20-069 20-070 20-071 20-072 20-073 20-074 20-075 20-064
Camozzi :ND6500 04-02 ND6500 04-04 ND6500 04-06 ND6500 04-08*ND6500 06-02 ND6500 06-04 ND6500 06-06 ND6500 06-08 ND6500 08-04 ND6500 08-06 ND6500 08-08 ND6500 08-12*ND6500 10-06 ND6500 10-08 ND6500 12-06*ND6500 12-08 ND6500 12-12
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
O-Ring Seal | NBR (other materials are available upon request) |
Gripping Mechanism | Stainless Steel |
Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
Vacuum Duty | 29.5 Inch Hg |
Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.