BRTS Male Run Tee Tube to Pipe Brass One Touch Fittings 12-468 50-571 271-OFS 11715 AQ71-PS 56440 3103 171PL KQY
12-468 50-571 271-OFS 11715 AQ71-PS 56440 3103 171PL KQY
Mod. | A | D | C | E | F | H | L | M | SW | SW1 | Weight-M(g) |
BRTS-M4-M5 | 4 | M5 | 5.5 | 12.5 | 9 | 4 | 34 | 17.5 | 8 | 8 | 18 |
BRTS-M4-G2 | 4 | Gl/8 | 3.5 | 14.5 | 9 | 6 | 38 | 17.5 | 8 | 12 | 19 |
BRTS-M5-M5 | 5 | M5 | 5.5 | 12.5 | 10 | 4 | 36.5 | 20.5 | 9 | 8 | 19 |
BRTS-M6-G2 | 6 | Gl/8 | 4 | 15 | 12.7 | 6 | 41 | 20 | 9 | 12 | 26 |
BRTS-M6-G4 | 6 | Gl/4 | 4 | 16 | 12.7 | 7 | 43 | 20 | 9 | 15 | 36 |
BRTS-M8-G2 | 8 | Gl/8 | 5 | 16 | 14.2 | 6 | 44.5 | 22.5 | 11 | 12 | 31 |
BRTS-M8-G4 | 8 | Gl/4 | 5 | 17 | 14.2 | 7 | 46.5 | 22.5 | 11 | 15 | 42 |
BRTS-M8-G6 | 8 | G5/8 | 5 | 17 | 14.2 | 7 | 46.5 | 22.5 | 11 | 19 | 50 |
BRTS-M10-G4 | 10 | Gl/4 | 5.8 | 19.5 | 16.5 | 7 | 52.5 | 26 | 15 | 15 | 46 |
BRTS-M10-G6 | 10 | G5/8 | 5.8 | 19.5 | 16.5 | 7 | 52.5 | 26 | 13 | 19 | 66 |
BRTS-M12-G4 | 12 | Gl/4 | 7.3 | 20 | 16.5 | 7 | 55.5 | 26.5 | 15 | 17 | 73 |
BRTS-M12-G6 | 12 | G5/8 | 7.3 | 20.5 | 19.5 | 7 | 54 | 26.5 | 15 | 19 | 64 |
Interchangeability for reference
Parker : 171PLM-4M-2 171PLM-4-4 171PLM-6-4 171PLM-6-6 171PLM-6-8 171PLM-8-6
Eaton/WeatherHead : 1171x4Mx2PTS 1171x5Mx2PTS 1171x5Mx4PTS 1171x6Mx2PTS 1171x6Mx4PTS 1171x8Mx6PTS 1171x10Mx4PTS 1171x10Mx6PTS 1171x12Mx6PTS
Midland : 20-160 20-161 20-162 20-163 20-164 20-165 20-174 20-166 20-167
Camozzi : ND6440 53-02 ND6440 53-04 ND6440 04-02 ND6440 04-04 ND6440 04-06 ND6440 04-08*ND6440 06-04 ND6440 06-06 ND6440 06-08 ND6440 08-04 ND6440 08-06 ND6440 08-08 ND6440 10-08
Metal/Brass Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Construction
Specification
O-Ring Seal | NBR (other materials are available upon request) |
Gripping Mechanism | Stainless Steel |
Temperature Range | 32° F to 176°F (higher temperature are possible with special O-rings) |
Pressure Max | 230 PSI (mainly limited by tube’s enduring) |
Vacuum Duty | 29.5 Inch Hg |
Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.