We help the world growing since 1983

F40 Cap SAE J512 SAE 45°flare Fittings Adapter Connector 640F 41FC 56 N5 2129 54 440

Short Description:

Classification:SAE 45° Flare Fittings
Types of :Cap
Support customized: OEM ODM OBM
Standard:
model :F40
Other brand interchangeable models :640F 41FC 56 N5 2129 54 440
Connection method: Female
Pinch size :3/16″ 1/4″ 5/16″ 3/8″ 1/2″ 5/8″ 3/4″
material:Brass


Product Detail

Product Tags

F40 Cap

PART# TUBE O. D C D L
F40-04 1/4 9/16 .258 .94
F40-05 5/16 5/8 .320 1.12
F40-06 3/8 3/4 .383 1.31
F40-08 1/2 7/8 .508 1.62
F40-10 5/8 1-1/16 .633 1.88
F40-12 3/4 1-1/4 .758 1.90

Interchangeability for reference

Parker : 14FSX-4 14FSX-5 14FSX-6 14FSX-8 14FSX-10 14FSX-12 14FS-6-4 14FS-8-6 14FS-10-8

Eaton/WeatherHead : 40×2 40×3 40×4 40×5 40×6 40×8 40×10 40×12

Midland : 10-038 10-039 10-040 10-041 10-042 10-043 10-044 10-045

 

attention please :Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.

 

Actual O.D. of Flare Fittings
 
SAE 45 Flare Fittings

SAE 45° Flare Fittings & Adapters

 

Industry Standard - SAE J512 45° Flare

Specification
  1. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
  2. Working Pressure: up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing – up to 5000 psi with bundy-weld (double flared) and 3500 psi with copper tubing, depending on size. Obviously, Temperature and type of tubing used are important factors.
Installation Instructions

SAE 45 Degree Flare Fitting

  1. Cut tubing to desired lenght. Make sure all burrs are removed and ends are cut square.
  2. Slide nut on tube. Threaded and “A” of nut must face out.
  3. Flare end of tube with a 45° flaring tool. a-Measure flare diameter b-Examine flare for excessive thin out.
  4. Lubricat threads and assemble to fitting body. Nut should be turned hand out.
  5. Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.

 

SAE 45 Degree Flare Fittings – Brass Material

Applications

LP and natural gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Used on low, medium and high pressure lines under the most adverse conditions, compatible with copper, brass, aluminum and steel hydraulic tubing that can be flared.

Features
  1. Construction – Two piece body and nut, straight barstock & forged fittings.
  2. Good Vibration resistance – use long nut when greater vibration resistance is required.
  3. Conformance – Heavy duty flare fittings are manufactured to SAE specifications, Meets specifications and standards of ASA, ASME, SAE, and MS (Military standards).
  4. Reusability – Can be assembled and re-assembled repeatedly & Resists mechanical pull-out.
Used With

Copper, brass, aluminum and steel hydraulic tubing that can be flared.

Tolerance

+/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical


  • Previous:
  • Next:

  • Related Products