PUT Union Tee Plastic Poly Push In Tube to Tube Adapter Connector Fittings
| Model Type — PE Union Tee | |||||||||||||
 |
Metric Tube | Inch Tube | |||||||||||
| PUT04 | PUT5/32 | ||||||||||||
| PUT06 | PUT1/4 | ||||||||||||
| PUT08 | PUT5/16 | ||||||||||||
| PUT10 | PUT3/8 | ||||||||||||
| PUT12 | PUT1/2 | ||||||||||||
| PUT14 | PUT12-10 | ||||||||||||
| PUT15 | PUT3/8-5/16 | ||||||||||||
| PUT16 | PUT1/2-3/8 | ||||||||||||
| PUT06-04 | PUT1/4-5/32 | ||||||||||||
| Union Tee | PUT08-06 | PUT5/16-1/4 | |||||||||||
| PUT10-08 | PUT3/8-5/16 | ||||||||||||
| PUT12-10 | PUT1/2-3/8 | ||||||||||||
| PUT06-04 | PUT1/4-5/32 | ||||||||||||
| PUT08-06 | PUT5/16-1/4 | ||||||||||||
| PUT10-08 | |||||||||||||
| MODEL | A | D | E | F | Weight(g) |
| PUT04 | 4 | 18.8 | 10.7 | 3 | 6.1 |
| PUT06 | 6 | 20.1 | 13.3 | 3 | 8.9 |
| PUT08 | 8 | 22.6 | 14.5 | 3 | 10.7 |
| PUT10 | 10 | 26.5 | 18.2 | 4 | 19.9 |
| PUT12 | 12 | 28.3 | 20.6 | 4 | 25.1 |
| PUT14 | 14 | 31 | 23.6 | 5 | 35.1 |
| PUT16 | 16 | 32.5 | 25.2 | 5 | 35.2 |
| MODEL | A | B | C | D | E | F H1(Hex) | H2(Hex) Weight(g) |
| PUT06-04 | 6 | 4 | 37.4 | 14.9 | 3.3 | 15.5 | |
| PUT08-04 | 8 | 4 | 38.9 | 14.9 | 3.3 | 15.5 | |
| PUT08-06 | 8 | 6 | 39.4 | 15.4 | 3.3 | 17.1 | |
| PUT10-06 | 10 | 6 | 43.2 | 15.4 | 3.3 | 17.1 | |
| PUT10-08 | 10 | 8 | 45.9 | 18.1 | 3.3 | 18.2 | |
| PUT12-08 | 12 | 8 | 46.8 | 18.1 | 4.4 | 18.2 | |
| PUT12-10 | 12 | 10 | 49.7 | 21.0 | 4.4 | 19.9 |
reducing Tee
| MODEL | A | A1 | B | D | E | El | F | Weight(g) |
| PUT06-04 | 6 | 4 | 20.1 | 13.3 | 13.3 | 3 | 6.4 | |
| PUT08-06 | 8 | 6 | 22.6 | 14.5 | 14.5 | 3 | 8.7 | |
| PUT10-08 | 10 | 8 | 26.5 | 18.2 | 18.2 | 4 | 13.6 | |
| PUT12-10 | 12 | 10 | 28.3 | 20.6 | 20.6 | 4 | 19 | |
| PUT16-12 | 16 | 12 | 32.5 | 25.2 | 25.2 | 5 | 21.2 |
attention please ：Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
| O-Ring Seal | NBR (other materials are available upon request) |
| Gripping Mechanism | Stainless Steel |
| Temperature Range | 32° F to 140°F |
| Pressure Max | 150 PSI |
| Vacuum Duty | 29.5 Inch Hg |
| Media | Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
 |
 |
| Figure 1 | Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
