MODEL |
A |
B |
C |
D |
E |
F |
Weight(g) |
PP04 |
|
|
|
29.5 |
15.5 |
4 |
0.3 |
PP06 |
|
|
|
34 |
18 |
6 |
0.6 |
PP08 |
|
|
|
37 |
18.5 |
8 |
1 |
PP10 |
|
|
|
39.5 |
21 |
10 |
1.5 |
Pp12 |
|
|
|
43 |
23 |
12 |
2 |
attention please :Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice.
Plastic Push-In Fittings
Features
- Simply to install & uninstall with no tools.
- Stainless steel tube locking mechanism.
- Thread sealant on taper threads, O-ring face seal on G threads.
- NBR as the standard sealing material,other materials are available upon request.
- Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
- Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
- Thread: BSPP, BSPT, NPT (Please contact us for other styles)
Specification
O-Ring Seal |
NBR (other materials are available upon request) |
Gripping Mechanism |
Stainless Steel |
Temperature Range |
32° F to 140°F |
Pressure Max |
150 PSI |
Vacuum Duty |
29.5 Inch Hg |
Media |
Compressed Air |
Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Installation Instructions
|
|
Figure 1 |
Figure 2 |
To connect tube (see figure 1)
- Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
- Check that port or mating part is clean and free of debris.
- Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
- Pull on tubing to verify it is fully inserted.
To disconnect tube (see figure 2)
- Simply press release button, hold against body, and pull tubing out of fitting.
Previous: PC Male Straight Plastic Poly Push In Tube to Pipe Adapter Connector Fittings
Next: PJK Stem Triple Branch Connector Plastic Poly Push In Tube to Tube Adapter Connector Fittings