We help the world growing since 1983

3162 Countersunk Hex pipe Plug US Brass Pipe fittings & Adapters

Short Description:


Product Detail

Product Tags

3153 Hex Socket PlugSAE J531

PART# Thread size Socket Hex L
3162-02 1/8 3/16 .18
3162-04 1/4 1/4 .26
3162-06 3/8 15/16 .31
3162-08 1/2 3/8 .39
3162-12 3/4 9/16 .56

 Interchangeability for reference

Parker :219P-2 219P-4 219P-6 219P-8 219P-12

Eaton :3151×2 3151×4 3151×6 3151×8 3151×12

Midland :28-092 28-093 28-094 28-095 28-096 28-097

Part# Thread sizeNPTF A Socket size Approx.Wt.Lbs.
28-092 1/16″ 0.3 0.12 0.01
28-093 1/8″ 0.3 0.18 0.01
28-094 1/4″ 0.45 0.26 0.02
28-095 3/8″ 0.45 0.31 0.03
28-096 12″ 0.61 0.39 0.05
28-097 3/4″ 0.62 0.56 0.1

attention please :Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.

 

Brass Compression Fittings & Adapters

Applications

Compatible with copper, brass, aluminum and thermoplastic tubing for instrumentation, hydraulic and pneumatic systems like typical fluid air, oil, water, lubricant and other applications.
Note: When use with thermoplastic tubing, a brass insert is required for support.

Features
  1. Construction – Three piece unit: body, nut (available with long or short nut) and sleeve. Extruded and Forged Configuration.
  2. Vibration resistance – Fair vibration resistance with short nut, The long nut can be used for greater vibration application.
  3. Advantages – Low cost. Easy to assemble without special tube prep, no flaring.Broad selection of styles and sizes.
Specification
  1. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
  2. Working Pressure: up to 2000 PSI with a 4:1 safety factor depending on tube sizes. When using plastic tubing, use the working pressure for type used.
Assembly Instructions

Compression Tube Fittings

  1. Cut tubing to desired length.
  2. Slide nut and then sleeve on tube. Threaded end “A” of nut must face out.
  3. Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder.
  4. Lubricate threads and assemble to fitting body.
  5. Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart (For Fractional Tubes) below.
TUBE SIZE
Additional Turns From Hand Tight
1/8” thru 1/4”
1-1/4
5/16”
1-3/4
3/8” thru 1”
2-1/4

US Brass Compression Fittings & Adapters

US Brass Compression Fitting

- Extruded Bar Stock, Hex Forging Blank, Fractional Tube Dia & NPT Thread Mainly.

Euro Brass Compression Fittings & Adapters

Euro Brass Compression Fitting

- Extruded Bar Stock, Round Forging Blank, Nickel-Plated, Metric Tube Dia & BSP Thread Mainly.


  • Previous:
  • Next:

  • Related Products