We help the world growing since 1983

1468 SAE 100102 BA Male Pipe Adapter Brass Fittings DOT Air Brake Adapter Connector End port For Nylon Tubing

Short Description:


Product Detail

Product Tags

1468 Male Connector SAE 100102 BA SAE 100102 BA

PART#

TUBE O.D × MALE NPTF C M
1468-04-02 1/4×1/8 7/16 .88
1468-04-04 1/4×1/4 9/16 1.09
1468-04-06 1/4×3/8 11/16 1.12
1468-06-02 3/8×1/8 9/16 1.02
1468-06-04 3/8×1/4 9/16 1.20
1468-06-06 3/8×3/8 11/16 1.23
1468-06-08 3/8×1/2 7/8 1.42
1468-08-04 1/2×1/4 11/16 1.32
1468-08-06 1/2×3/8 11/16 1.32
1468-08-08 1/2×1/2 7/8 1.51
1468-10-06 5/8×3/8 13/16 1.38
1468-10-08 5/8×1/2 7/8 1.57
1468-10-12 5/8×3/4 1-1/16 1.63
1468-12-08 3/4×1/2 1″ 1.67
1468-08-12 1/2×3/4 1-1/16

1.70

Interchangeability for reference

Parker : VS68NTA-3-1*VS68NTA-3-2*VS68NTA-3-4*VS68NTA-4-2 VS68NTA-4-4 VS68NTA-4-6 VS68NTA-6-2 VS68NTA-6-4 VS68NTA-6-6 VS68NTA-6-8 VS68NTA-8-4 VS68NTA-8-6 VS68NTA-8-8 VS68NTA-10-6 VS68NTA-10-8 VS68NTA-12-6 VS68NTA-12-8 VS68NTA-12-12

Eaton/WeatherHead : 1468x4x1 1468×4 1468x4x4 1468x4x6 1468x6x2 1468×6 1468x6x6 1468x6x8 1468x8x4 1468×8 1468x8x8 1468x8x12 1468x10x6 1468×10 1468x10x12 1468×12 1468x12x12

 Midland : 38-072 38-073 38-074 38-075 38-076 38-077 38-078 38-079 38-080 38-081 38-082 38-087 38-083 38-084 38-088 38-085 38-086
attention please :Quotations and delivery of non-stock items supplied on request. Configurations and dimen sions subject to change without notice. Additional information can be found in SAE J530 Automotive Pipe Fittings and SAE J531 Drain Plugs.

DOT Air Brake Fittings For Nylon Tubing

Conformance – Meets specifications and standards of SAE J246, SAE J1131 and DOT FMVSS 571.106.

Applications

Air brake systems or in cab air controls, Use with SAE J844 Type A and B nylon tubing, except where temperatures exceed +200°F(+93°C) or where battery acid can drip on tubing.

Features

  1. Construction – Three piece unit: body, nut and sleeve. Extruded(CA360) and Forged(CA377) Configuration.
  2. Vibration resistance – Fair resistance.
  3. Advantages – Easy to assemble (no tube preparation or flaring required.) Built in tube support and ribbed sleeve for compression and positive grip. May be used with copper tubing by using long nut and spherical sleeve(DOT Air Brake Fittings For Copper Tubing). Insert should be removed for copper tubing use.

Specification

  1. Temperature Range: Fittings will withstand variations from -40°F to +200°F (-40°C to +93°C)
  2. Working Pressure: Maximum operating pressure of 150 psi.

Assembly Instructions

DOT Air Brake Fitting(Nylon Tubing)

  1. Cut tubing to desired lengths quarely, maximum of 15° angle allowable. Check that port or mating part is clean and free of debris.
  2. Slide nut and then sleeve on tubing. Threaded end of nut “A” must face toward connector body.
  3. Insert tubing into the preassembled fitting. Make sure tubing is bottomed in connector.
  4. Tighten nut with wrench until one thread remains visible on the fitting body, this will allow for a number of remakes; or, the nut should be screwed down finger tight, then the wrench-tightened as indicated in the following table.
Tube Size (O.D) 1/4″ 3/8″ 1/2″ 5/8″ 3/4″
Thread Size 7/16-24 17/32-24 11/16-20 13/16-18 1-18
Additional Turns From Hand Tight 3 4 4 3-1/2 3-1/2

  • Previous:
  • Next:

  • Related Products